Using Hatch with Brother SE400
I do not see my SE400 listed with the Brother machines. How can I use Hatch with this machine?
You can select any of the Brother machines. It's the hoop size that is important.
I would suggest to use the 950 series as shown below as this has the 4x4 hoop already listed.
Also, this is direct connect to the machine. When you get ready to export the design you will need to see if it can direct connect through the "transfer icon".
You machine will have to be connected to the computer and you probably will need to refer to your machine manual. The machine must be seen by the computer as an external drive.