References in our online documentation can be found here:
Additional tips for sewing out.
Turn on: Add registration marks on output (I usually use Medium setting for the margin) before you go into the Multi-hooping toolbox
- To find this: Click on Embroidery Settings Menu > Multi-Hooping tab
- Check “Add registration marks on output > select Margin
Click on the Multi-Hooping toolbox
Create your multi-hooping as per the instructions in the online documentation
When multi-hooping is complete > click on Calculate Hoopings
Click on Output toolbox
Click "Save Design As" and save as .EMB
Click "Export Design" and save to your desired machine format. It will split the designs into the required hoopings. Each hooping will have a number at the end to show the order to stitch out.
Now you are ready to stitch your design.
I prefer to use sticky back stabilizer as it makes the process easier and faster. There are many on the market. I personally use Stabil-Stick stabilizer so I will give you the directions for using this.
Get ready for the 1st hooping:
- Hoop the sticky stabilizer (do not hoop the fabric for your design)
- Now lay your fabric to the sticky stabilizer
- Stitch your first design
- At the end of the design, the last color stitched will be the “registration marks” that you will use for the next hooping.
- Remove from the hoop and remove the stabilizer.
Now for the 2nd hooping
6. Hoop the sticky stabilizer (do not hoop the fabric for your design)
7. Stitch the 1st color. This will be registration marks. You will stitch this on the stabilizer only!
8. Line up the marks from the 1st hooping with these. (See picture below)
9. Stitch the 2nd hooping
If you have additional hoopings continue as above, matching the registration marks.
Below are some images.
In this example I will have two hoopings for this cake. The first hooping is shown in the red hoop. The second hooping is shown in the blue hoop.
Notice it stitched 2 registration marks at the end of the design. (Shown in red)
The first color you stitch in the next hooping will be the registration marks. They will line up with the red marks above.
Here is a tip for lining them up perfectly.
See step 8 above.
Your stitches will line up perfectly!